Innovative and Exceptional 880 / 881 Cut-Off Machines
Jan 01, 2014 - Newport News, VA
5100 Chestnut Avenue, Newport News, VA 23605
Phone: (757) 245-4228
Fax: (757) 245-0800
For more info: Jeff Burgess at email@example.com
Solo Incorporated, located in Newport News, VA, is an affiliate of Solo Kleinmotoren GmbH, headquartered in
Sindelfingen, Germany. Solo Kleinmotoren GmbH has developed, manufactured and distributed sprayers and
power equipment for over 60 years to forestry enterprises, and landscaping and gardening companies, and is a
pioneer in the development of small and lightweight two-stroke engines. High quality and innovative technology
have made Solo a strong brand name. Now, a new chapter in the company’s history starts with the first generation
of innovative cut-off saws.
Wherever serious work performance is required for cutting materials such as concrete, steel, asphalt, castings, or
stone, the new SOLO cut-off machines are the professional’s choice. The models 880 and 881 set new standards
in ergonomic design, refined technical features, and ease of maintenance that are quite unique in this engine
class. Available in both 12"/300 mm and 14"/350 mm, the 881 is supplied with Solo’s iLube® intelligent lubrication
system. The heart of it all is the 81 cc SOLO two-stroke high performance engine. Even the hardest metals will
not stand a chance against 5.44 HP/ 4 kW of pure power. The utilization of the latest technology for catalytic
converters helps the environment by keeping emissions clean without significant loss of power.
Starting has never been easier
There is no manual choke to pull and no half-throttle button to push. The electronic ignition system controls the
carburetor and automatically sets the correct adjustment by measuring the engine temperature. Depending on
the engine temperature, a magnetic valve is opened or closed to provide the optimum fuel mixture. The primer
supplies the carburetor with fresh fuel for starting, and the decompression valve allows easy starting of the engine.
A compensator ensures constant engine performance even with a dirty and soiled air filter. If you need to stop,
simply push a button. The One Push-Stop-System stops the engine and immediately prepares the engine again for
renewed operation without further adjustments.
Self-cleaning air filter
The effective multi-stage air filter system with patented twin-pipe-interceptor constantly blows the dust away from
the machine. The design of a pre-separation airbox with two suction pipes creates air pulsation that blows dust out
through the suction pipes. For that reason only pre-filtered air will reach the paper segments of the main filter. This
makes the SOLO 880 and 881 cut-off machines more resistant to dust when used on building sites. By turning an
external rocker wheel, vibrations shake remaining impurities from the air filter.
Right from the beginning of this machine’s development, optimum weight distribution was a priority. This has
been achieved through a compact design and optimum handle symmetry that has not been previously seen
in this performance range. The utilization of light-weight but very robust materials contribute to the ergonomic
advantages. An example is the cutting wheel protection cover made from magnesium. The anti-vibration system
with five steel springs and the rubber-covered handles contribute to fatigue-free operation. A protection plate
reduces spark spray against the operator and the machine when cutting steel. The robust cutting arm can be
easily turned for an inside/outside cut.
Long operational service life – Designed for tough every day use
To drive the cutting wheel, we use a low wear V-ribbed belt. A semi-automatic system assists to re-tighten the belt.
The special starter rope lasts 10 times longer than standard ropes. The SOLO high performance engine is equipped
with a Nikasil®-coated cylinder and 2-ring Mahle®-piston for maximum service life expectancy.
And now the world‘s first iLube® – Never worry again about the fuel mixture
Solo’s patented iLube® translates to “Intelligent Lubrication.ʼʼ The 881 models are lubricated intelligently with a
separate system: a separate tank contains 10.8 oz/0.32 liter of two-stroke oil. Subject to the engine speed, the
oil is metered to the fuel by an electronically controlled pump. If the oil tank is empty, the engine automatically
switches to a fault mode that reduces the engine speed to just above idling. This is the signal to replenish the oil
tank. Difficult and cumbersome mixing of fuel and oil before each use is no longer necessary, and possible fuel-mix
problems are prevented. Depending on the way the machine is used, the oil supply is good for up to 20 tanks of
fuel. Re-fueling is made easier by the special tank caps: they can be opened without the use of tools and cannot
For further details on Solo cut-off saws and accessories, see our special Cut-Off Saw brochure, or contact us at firstname.lastname@example.org or by phone (757) 245-4228.
Solo is a world class manufacturer of power equipment and sprayers. This year, Solo has added two new sprayers that are designed specifically to handle the toughest spraying challenges when applying acetone-based products and foam formulations. Solo is also introducing its new line of cut-off saws that are an extension of its fine line of German crafted and engineered power equipment. Solo offers sprayers and accessories that help get the job done right the first time.
Message Sent! Thank you for your inquiry.